In addition to this high performance, these projectors are designed to be small and lightweight enabling ease of installation in almost any type of facility. Equally important, their HD-SDI input – which provides an encrypted connection when – combined with an optional “media-block”, enables digital contents to be securely projected onto screens with absolutely no compromise in the “4K” quality.
The Sony SRX-S110 is an affordable 10,000 ANSI lumen model addressing smaller installations. The 4K-SXRD imaging panel used in both projectors can be driven at single-mode, dual-mode, and quad-mode projection. In quad mode, four screens of full HD images (1920 x 1080 pixels) can be projected from the 4K-SXRD panel simultaneously. In single mode, the industry’s long-desired 4096 x 2160-pixel images are no longer imagined – they are a true reality.
Multi-screen mode
The high resolution of the projector enables single-, dual and quad-mode projection in which full HD images can be displayed even in each of two or four divided screens. Images from different input sources can be displayed in these divided screens simultaneously.
High contrast ratio
The combination of the SXRD imaging devices and 3PBS optical devices offers a high contrast ratio of more than 1800:1.
Gamma correction circuit
Three types of gamma correction circuit, 1.8, 2.2 and 2.6, are selectable according to the signal input, allowing projection of an image with optimum brightness.
Color space feature
The SRX-S110 supports three standards of color tonal reproduction range, DCDM, 709 and CIEXYZ, allowing
you to obtain an image with precise color reproduction according to the input sources.
Flexible and Reliable System
Dual lamp system
The projector adopts a dual lamp system for versatility of use. You can select dual-lamp or single-lamp mode, and can reduce each lamp’s power output. These modes allow you to save power and increase lamp life.Also, if one bulb burns out, the other keeps projecting images.
Input signal flexibility
To increase the configuration flexibility of the SRX-Series projectors, slots are available to accommodate four different optional boards that connect to various types of signal format.
The SRX-S110 models are equipped with a DVI signal input module as standard, which provides the 1080/60P input capability available only with these units.
These four input boards can be accommodated simultaneously in the side panel of the projector. Users can
select the screen mode from single, dual, and quad mode, and assign the appropriate signal board to each quadrant.
- The LKRI-001 Analog Input Board utilizes 5 BNC connectors that can accept 0.7 volt analog signal levels as RGBS, RGB sync on G, RGBHV or YUV formats.
- The LKRI-002 HD-SDI (4:2:2) Input Board can accept both SMPTE 259M SD digital 525/625 line video and SMPTE 292M 1080 4:2:2 Y Pb Pr serial picture data. Switching is automatic by detection of the input signal frequency.
- The LKRI-003 Dual-link HD-SDI Input Board can accept any of the following signals: SMPTE 372M dual-link HD-SDI (4:4:4), SMPTE 292M HD-SDI (4:2:2), dual-link DC-SDI (RGB 4:4:4), DC-SDI (YPbPr 4:2:2), or 12-bit (X’Y’Z’ 4:4:4) signals. With four LKRI-003 boards, the SRX-R110 or SRX-R105 can project 4096 x 2160 4k images.
- The LKRI-004 DVI Interface Board can accept DVI signals up to 2048 x 1080.
