Dual lamp system provides high brightness of 5500 ANSI lumens.
Continuous use is also possible when using a single lamp mode.
By employing a dual lamp system, high brightness of 5500 ANSI lumens has been achieved. This is sufficient when high brightness is required in large venues. Furthermore, in the Single lamp mode, since the projector can be operated continuously by using the automatic lamp switching function, it is suitable for monitoring purposes. Lamp Eco mode is available in both the dual lamp and single lamp modes for extending the service life of the lamp. The lamp service life has been extended to 3000 hours from 2000 hours in the NP4100w, so that it is possible to continuously operate the projector for more hours.
Ecological operation with power consumption of 1W in standby mode
If the standby mode is set to Power Saving while the projector is in the standby state, the power consumption in standby mode becomes 5W. Since the projector can stay in the standby state with little power consumption, it is still possible to ecologically operate the projector when mounted on the ceiling even if it is difficult to turn off the main power.
Tilt Free expansion possibility for installation environments
Tilt Free makes it possible to install the projector inclined up to 90 degrees in the vertical direction. With this function it is possible to install the projector with an acute angle or mirror reflection for use in a broader range of installation environments such as a display in a commercial facility or special event.
Supporting the optional remote controller NP02RC to which the control ID can be registered
When multiple projectors are used simultaneously, the same quantity of remote controllers may be required. On the other hand, NP02RC can manipulate multiple projectors independently by setting separate ID numbers.
It is also possible to control the multiple projectors collectively by setting the same ID number.
The power can be controlled intensively with Auto Start and Direct Power Off
The NEC NP4100w start projecting images automatically when AC power is supplied and you can turn off the power source with a switch or a circuit breaker while projecting images or running the fan. With these functions, it is possible to completely control the power supply to the projector with the power distribution board.
A contrast ratio of 2100:1 is achieved using DynamicBlack™ and the DLP technology
With the introduction of DynamicBlack™ the projector delivers high contrast ratio of 2100:1 for superior image display capability, particularly to express the vivid details in dark images.
Two types of Replaceable Colour Wheel and BrilliantColor project vivid images
A six-segment colour wheel, in addition to the standard four-segment colour wheel - and the colour wheels can be changed by the customer. The BrilliantColor results in superior reproducibility of neutral tints for vivid images of natural scenery.* The brightness when using the six-segment colour wheel is about 71% of the brightness when using the four-segment colour wheel.
