Quick start & Direct Power Off
Your NEC projector is setup and ready to display your presentation after 8 seconds from powering on, with NEC's Quick Start function. And for a speedy shut down, projector can be turned off using a power strip equipped with a switch and a breaker without powering down the projector, with the Direct Power Off function.
Wired LAN Connectivity
Connect a LAN cable to the LAN port (RJ-45) on the main unit of the projector to control the projector from a remote PC via the network; for instance, use the PC to turn the power to the projector on and off or switch input signals.
Wall Colour Correction for vivid images even without a screen
Without a screen, projected images are affected because of the colour of the wall or blackboard you are projecting on to. The built-in colour correction for projecting images on a coloured wall or blackboard in this projector means that the colour tones of the projected image is approximate to those that are projected on to a white screen. The following nine colour options are available : whiteboard, blackboard, blackboard (grey), light yellow, light green, light blue, sky blue, light rose, and pink.
Very quiet operation in Eco Mode
Eco Mode operation drops NP500 noise to 29 dB for very quiet operation and extends the lamp replacement period up to a maximum of 4000 hours. In this mode, total cost of ownership can be effectively reduced. The projector can be put in to Eco Mode very easily with press of a button on the remote control.
SAVE MONEY, RESOURCES AND YOUR PROJECTOR
- Extended lamp life with ECO Mode™ technology increases lamp life up to 4000 hours, while lowering power consumption
- Nearly silent operation with noise level as low as 29dB in ECO Mode
- Power management enables projector to automatically turn off when an incoming signal is not detected from any of the inputs
- Password protection restricts unauthorized use of projector
- Cabinet control lock setting enables user to deactivate buttons on cabinet to prevent unwanted changes to projector settings
- Email notification informs the system administrator when the lamp approaches the end of its useful life
